DemonFx Filtration II G String ISP Decimator Clone Pedal

The FILTRATION II G String Noise Reduction pedal is
the latest generation in noise reduction technology.
The FILTRATION features improved Linear Time Vector
Processing that offers the smoothest, ripple free
approach in tracking the envelope of the input signal.
The LTVP will instantly respond to short staccato notes
and at the same time provide ripple free control of long
sustained notes while downward expanding. The
FILTRATION II pedal is easy to use and simple to
operate

The threshold control on the FILTRATION II G String
should be adjusted by listening to the noise floor while
no instrument signal is present. The threshold control
should be turned clockwise until the noise floor
becomes inaudible. It may be necessary to readjust the
threshold with the guitar volume all the way on in order
to accommodate the additional noise the guitar may
induce. Adjusting the threshold too far clockwise may
cause the downward expander to attenuate the output
level too quickly and not allow the signal to decay
naturally

The FILTRATION II G String has 4 ¼ inch jacks.
Connect the guitar directly to the Guitar IN.
Connect the Guitar OUT to the input of the
amplifier. Connect the DEC IN to the loop
send and DEC OUT to the loop return. For
best performance place all gain pedals in front
of the amplifier and DEC IN. You can put
Delay and Reverb effects pedals after the
Decimator II G String and before the loop
return to avoid cutting off reverb and delay
tails.


Description:
The FILTRATION II G String Noise Reduction pedal is
the latest generation in noise reduction technology.
The Decimator features improved Linear Time Vector
Processing that offers the smoothest, ripple free
approach in tracking the envelope of the input signal.
The LTVP will instantly respond to short staccato notes and at the same time provide ripple free control of long
sustained notes while downward expanding.
The FILTRATION II G String Noise Reduction pedal is
easy to use and simple to operate.

Features:
The FILTRATION II G String has 4 ¼ inch jacks.
Connect the guitar directly to the Guitar IN. Connect the Guitar OUT to the input of the amplifier.
Connect the DEC IN to the loop send and DEC OUT to
the loop return. For best performance place all gain
pedals in front of the amplifier and DEC IN.
You can put Delay and Reverb effects pedals after
the FILTRATION II G String and before the loop return
to avoid cutting off reverb and delay tails.

Specs:
- Input Impedance: 500K ohms
– Maximum Input Level: +12dbu
– Effective Noise Reduction: greater than 60db
– Dynamic Range: greater than 100db
– Total Harmonic Distortion: .05% typical
– Power consumption: 35mA @9VDC (Not Included)
– Release response: Program dependent based on
Time Vector Processing